Supports

 

Support Bar
From $25

• Telescoping bar used on top of panels for stabilization.

• Best utilized in a corner to make the hypotenuse of a right angle triangle.

• Tubes on the ends of bars slip around the post at the top of the panel.

•Leaves post on top accessible,  allowing you to use a Tent Hook, Banner Bar, etc from the same spot.

Extra Short - $25
Expands from 34" to 58"

Short - $30
Expands from 4' to 7'

Long - $40
Expands from 7' to 12'

2 in 1 Support Bar - $45
• Most versatile support bar.
• 3-pieces that extend from 46" to 122"
• Convenient to use and transport

 

Banner Bar
From $35

• Telescoping bar used on top of panels for support.

• Used primarily with track lighting for extra clearance.

• Differ from the support bars in that they rise up 8" from top of panel.

Extra Short - $35
Expands from 2' to 4'

Short - $40
Expands from 4' to 7'

Long - $50
Expands from 7' to 12'

2 in 1 Banner Bar - $55
Expands from 46" to 122"

 

Risers
$20 pair

• Attachment that converts a support bar into a banner bar.

• Raise the support bar 8" above the panel.

Tent Hook
$20

• Secures booth in windy conditions by attaching panels to canopy.

• Slides into the top panel post and hooks over the framework of your tent.

• Secure by turning knob counter-clockwise.

• Extends up to 12" from the panel top and works with most canopies.

•Use with Support Bars and Stiffeners for added support.

 

Standard Stiffener
$9

• Adds rigidity to panels connected in a straight line.

• U channel metal in silver vein powder coated finish.

• Measure 9" long.

L-Stiffener
$20

• Adds rigidity to panels connected at a 90º angle.

• U channel metal in silver vein powder coated finish.

• Please note that an L Stiffener is not a replacement for a support bar, which provides more strength

T-Stiffener
$20

• Adds rigidity to panels connected in a T configuration.

• U channel metal in silver vein powder coated finish.

Plus Stiffener
$30

• Adds rigidity to panels connected in an X configuration.

• U channel metal in silver vein powder coated finish.

Adjustable Stiffener
$25

• Accommodates 5 angles: 90º, 105º, 120º, 135º and 150º.

• Arm has 5 holes, securing each angle with a thumbscrew.

• Does not replace the L-Stiffener when setting up under a canopy. The adjustment arm protrudes past the panel and may interfere with the canopy leg.

Light Bar Adapter
$25 ea

• Adds a faux top post to your panel to create an additional spot for a Light Bar.

• U channel metal bracket is finished in silver vein.

• Hole in the middle to allow the panel post to slip through.

• Can be used at the end of your booth or in between 2 panels.

• For maximum support, we recommend using the original panel post for your Support/Banner Bar and the faux post for your Light Bar.