Pro Panels

Display Panels for Professional Artists

9017 Diplomacy Row Dallas, Tx 75247
toll free : 800 525 4159 / voice : 214 350 5765
fax : 214 350 7372 / email : questions@propanels.com

Replacement Parts

Strap Fastener
$0.75

This Strap Fastener is used to connect one panel to another. There is a strap attached to the top and bottom leg of each panel.

Coupler
$4

This solid metal coupler is used to connect the top and bottom halves of the Knock Down Panels together and to connect the extenders to the top of your panels. It is also used in the Banner Bar, Print Bin Hoops and Risers.

Risers
$16 pair

The Riser is used to raise the support bar 8" above the panel. It converts a support bar into a banner bar.

Leather Connectors
$0.50

The leather connector is slipped over the couplers of 2 adjacent Knock Down Panels. This holds the middle of the Knock Down Panels together.

Inserts / Levelers
$0.50 ea

The insert is the threaded white nylon piece that is inserted into the frame leg. This is the piece that the leveler screws into.
An octagonal black plastic foot that screws into the insert on the frame leg for height adjustment of about an inch.

S Hooks
$0.50 /bag of 5

S Hooks are installed into the holes of the anchor hanger and hanger extensions to hold the artwork.

Hitch Pin
$0.50

The Hitch Pin is a formed wire clip that is used to hold the sides of a desk, print bin and outdoor pedestal together at the top.

Brackets
$5 pair

These are the shelf brackets for the slot shelving system. These brackets are American made by Knape & Vogt, part number KV170. They are available in 8", 10" and 12" lengths.